Premium Carpet Adhesive
WELCO 1070

Welco 1070 Premium Carpet Adhesive is designed for tough interior carpet installations and carpet to pad systems. Welco 1070 forms a powerful bond with stiff-backed carpets. This adhesive remains tacky for an extended period of time, is low odor and environmentally friendly.

 

The installation site must be acclimated with HVAC in operation. The floor and room temperature, as well as flooring materials and adhesive, must be maintained at 65°- 95° F, and the humidity below 65% for 48 hours prior to, during, and after the testing and installation. Follow carpet manufacturer’s installation instructions and CRI 104 Standard.

 
  • Very quick, strong bond development
  • Low odor
  • CRI Green Label Plus Approved
  • Water clean up when wet
  • May be used on moisture free slabs above, below or on grade
  • Open time: 15 to 25 minutes
Install Welco 305 is a water-based, solvent-free, low odor adhesive that can be used in health conscious environments such as hospitals, schools, nursing homes, Welco 305 is recommended for most commercial and residential carpets in direct glue installations.
 
The installation site must be acclimated with HVAC in operation. The floor and room temperature, as well as flooring materials and adhesive, must be maintained at 65°- 95° F, and the humidity below 65% for 48 hours prior to, during, and after the testing and installation. See carpet manufacturer’s installation instructions and CRI 104 Standard.
  • Very quick bond development
  • Low odor
  • Freeze thaw stable to 15 F
  • CRI Green Label Approved
  • May be used on moisture free slabs above, below or on grade
  • Open time: 25 to 40 minutes
Multi-Purpose Flooring Adhesive
WELCO 305

Proud Affiliates:

tools4flooring-copy.png

© Copyright E.J. Welch Company 2019

Corporate Office

 

13735 Lakefront Drive

Earth City, MO 63045

 

314.739.2273